Heavy-Duty, Large Capacity Radial Drills |
 |
Models
CLC1250 &
CLC1600
Features
& Standard
Equipment
Specifications
Dimensions
Capacities |
|
| Features
& Standard Equipment |
-
Equipped with hydraulic Step-by-Step clamping system, with proper
selection on push button switch. Column, arm, gear box can be
clamped/released independently. Very easy to be operated, and tools will
always stay at the same point after tools shifting.
-
Gears in gear box are cooled by oil cycled by an oil pump to minimize
gear wear.
-
Friction type disc clutch absorbs impact force caused by vertical
movement of spindle, and protects all transmission units inside gear
box. With quick spindle return, the clutch will help speed-up the
tapping operation.
-
Specially designed manual tools ejector (drift).
-
Special arm elevating device is provided to prevent arm from falling
down abruptly after years of usage.
-
Speed pre-selection, speed change is hydraulically actuated. Fast and
very easy to operate.
-
Coolant System
-
Tool kit and manuals
|
Return to top
|
| Specifications |
|
Model |
CLC1250 |
CLC1600 |
|
Working Area |
|
|
Column Sleeve Dia (E) |
13.78" (350mm) |
13.78" (350mm) |
|
|
Column Face to Spindle Center |
|
|
|
Maximum (D+C) |
49.2" (1250mm) |
63" (1600mm) |
|
|
|
Minimum (D) |
13.78" (350mm) |
13.78" (350mm) |
|
|
Spindle Head Travel (C) |
35.4" (900mm) |
49.2" (1250mm) |
|
|
Base Surface to Spindle End |
|
|
|
Maximum (A) |
48" (1220mm) |
48" (1220mm) |
|
|
|
Minimum (B) |
13.4" (340mm) |
13.4" (340mm) |
|
|
Arm Vertical Travel (A-B) |
22.2" (565mm) |
22.2" (565mm) |
|
|
Arm Rotation (Right & Left) |
180° |
180° |
|
|
Baseplate Working Surface |
55.3"x 38.6" (1405mmx980mm) |
55.3"x 38.6" (1405mmx980mm) |
|
|
Box Table Area |
|
|
|
Length (L) |
25.0" (635mm) |
25.0" (635mm) |
|
|
|
Width (K) |
19.7" (500mm) |
19.7" (500mm) |
|
|
|
Height (H) |
19.7" (500mm) |
19.7" (500mm) |
|
|
Base Dimensions |
|
|
Floor Area (R x S) |
80"x38.6" (2030mmx980mm) |
93.7"x38.6" (2380mmx980mm) |
|
|
Height (Q) |
8.1" (205mm) |
8.1" (205mm) |
|
Drilling Head |
|
|
Spindle Taper |
MT#5 |
MT#5 |
|
|
Spindle Stroke |
12.4" (315mm) |
12.4" (315mm) |
|
|
Quill Diameter |
3.15" (80mm) |
3.15" (80mm) |
|
|
Number of Spindle Speed |
16 |
16 |
|
|
Spindle Speeds (rpm) |
25-2000 |
25-2000 |
|
|
Number of Steps |
16 |
16 |
|
|
Spindle Feed Rate (in(mm)/rev.) |
0.002"(.04mm)-0.126"(3.2mm) |
|
|
Spindle Drive Motor (2-speed) |
5 hp (2.75 Kw) |
5 hp (2.75 Kw) |
|
|
Elevating Motor
|
2 hp (1.5 Kw) |
2 hp (1.5 Kw) |
|
|
Clamping Motor |
1 hp (.75 Kw) |
1 hp (.75 Kw) |
|
|
Coolant Pump Motor |
1/8 hp (.10 Kw) |
1/8 hp (.10 Kw) |
|
Overall Measurements and Weight |
|
|
Max. Machine Height (F) |
110.6" (2810mm) |
110.6"(2810mm) |
|
|
Base and Column Height (G) |
102.4" (2600mm) |
102.4"(2600mm) |
|
|
Shipping Dim. |
|
|
|
Length |
88" (2235mm) |
102" (2590mm) |
|
|
|
Width |
48" (1220mm) |
48" (1220mm) |
|
|
|
Height |
100" (2540mm) |
100" (2540mm) |
|
|
Net Weight |
6,614 lbs (3000kg) |
7,716 lbs (3500kg) |
|
|
Shipping Weight |
7,804 lbs (3540kg) |
9,039 lbs (4100kg) |
|
Return to top
|
| Dimensions |
|
 |
Return to top
|
| Capacities |
|
Model |
CLC1250,
CLC1600 |
|
Drilling |
In Steel |
2" (50mm) |
|
|
In Cast Iron |
2.36" (60mm) |
|
Tapping |
In Steel |
1.77" (45mm) |
|
|
In Cast Iron |
2.17" (55mm) |
|
Boring |
In Steel |
4.33" (110mm) |
|
|
In Cast Iron |
6.5" (165mm) |
|
Return to top
|
