Clausing/Colchester Combi K-Series

Overview:

Built to last with TOOLROOM accuracy, your investment is secured by the historical and continued performance of both Colchester and FANUC.

The Revolutionary Combi K Series, from Europe’s largest builder of lathes, provides the wide range of performance, precision and flexibility demanded by today’s batch volume production enterprises. The slant bed, easy to use K Series with LASER calibrated ballscrews, high torque at low speeds and the most versatile FANUC control configuration available provides a machine tool configured to increase your company’s productivity with skilled CNC operators and / or with skilled manual machine operators.

A Revolutionary Designed Manually Operated Machine
A State of the Art CNC Slant Bed Machine

The versatile basic design features:

Electronically assisted handwheels with Direct Digital Readout, no backlash
Two speed transmission -- high torques and high speeds
Laser calibrated ballscrews
Large spindle ID
Slant,gap bed
Auto memory to auto duplicate manual operations
Full CNC capability
Animated, conversational control
Materials table within the control

The simplistic basic control / machine interface allows for precision productivity for all skill levels of operators.

Return to top

Machine Specification:

Capacity
Swing over bed	15.7"
Swing in the gap/length	23/6.5"
Swing over cross slide	9.65"
Distance between centers	50"
Z Axis (saddle) travel (Max. turning length)	50"
X Axis travel	8.66"
Spindle
Spindle center height (from floor)	42"
Spindle HP	15 HP
Spindle nose	D1-6
Spindle bore	2.13"
Internal spindle taper	3/4" per ft
Spindle front bearing I/D	3.7"
Spindle speed (2 ranges)	6-2500
Low Range	6-625 (full HP at 180)
High Range	25-2500 (full HP at 750)
Bed and Carriage
Bed width	12.6"
Bed Slant	30°
Z/X axis rapid traverse rate	590/394 ipm
Z axis thrust	2800 lbs.
Z axis ballscrew (pitch & dia)	1.25"/.39"
X axis thrust	562 lbs.
X axis ballscrew (pitch & dia)	.79/.16"
Tooling size	3/4" x 3/4"
Z & X Axis feedback	Absolute position encoder
Tailstock
Tailstock quill dia.	2.87"
Tailstock quill taper	No. 5 MT
Tailstock quill travel	5.51"
Accuracy	± 0.0002"
Repeatability	0.0001"
Overall Machine
Ergonomic guarding	included
Main power consumption	28 kVA
Electrical Specifications	208V, 230V or 460V, 3 phase, 60 Hz
Machine weight	6826 lbs.

Return to top

Combi K2 Toolroom Package Equipment:

	Toolpost	Crawford Quick Change w/ 3 Turning toolholders, 1 Boring bar holder, 1 #2 MT holder
	3 Jaw Chuck	10" 3 Jaw, Steel Body PBA Setrite Manual Chuck w/ 3" thru hole
	4 Jaw Chuck	12" 4 Jaw, PBA Manual Chuck w/ 2.95" thru hole
	Standard Faceplate	14" dia.
	Gap Faceplate	21.6" dia.
	Steady Rest (roller fingers)	3/8" - 6" capacity
	Follower Rest (roller fingers)	3/8" - 3-1/8" capacity

Return to top

Clausing Machine Tools in the Machine Shops of:

To Build a Winning Race Car... You Need Precision Machine Tools!
A Company.	Clausing Industrial, Inc. © 2005 1819 N. Pitcher Street Kalamazoo, MI 49007-1886 Phone: 800-323-0972 FAX: 269-345-5945	Service Center Goshen Indiana 811 Eisenhower Drive South Goshen, IN 46526 Phone: 800-535-6553 FAX: 574-533-0403
Last modified: February 22, 2007	Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.